It is currently 26 Jun 2017, 04:13
If you are new here and want to register an account send an email to info@rewtcustoms.com so I know your a real person and activate your account.

All times are UTC - 8 hours




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: 1966 Rambler American.
PostPosted: 05 Jun 2013, 20:23 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
saved another one from the scrapper. Needs a fuel pump and the lower metal behind the rear tires are the only rust. Guy down the street had to many cars and his landlord said get rid of somthing. He knows im into cars, so He sold it to me really cheap.
Its a 1966 Rambler American 2dr. 199 straight six, 3 speed collum shift, bucket seats. I really haven't decided what I am going to do with this car yet, but my main goal is to make it reliable and safe to cruise with the whole family.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 05 Jun 2013, 20:36 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
These pics are from the day I bought the car.

Image

Nice uncut dash
Image

Inside
Image

The engine..
Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 05 Jun 2013, 20:45 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Then I pushed her to the shop and started to drain all the old bad gas out. I then took the rear drivers tire off to get the bead cleaned and resealed.

Image

Installed a new electric fuel pump and ran the wires to the ignition and fused it under the dash. Then changed the oil and replaced the valve cover gasket to get it to stop leaking

Image

Chrome half light covers and fuzzy dice to the rearview.


Image

Had to install a RewT sticker to rep the shop.
Image

More to come on this project, first check out the brakes, then paint, interior, stereo system and a lot of 1 off custom touches. I will try to keep this updated.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 08 Jun 2013, 15:02 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I scored the original hub caps back.
Image

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 24 Aug 2013, 05:52 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Update time.. I am really starting to like this car. I haven't done anything to it the last couple of months except driving it.. It is now in the shop getting straight and ready for paint. I also scored new front and rear seats in really good shape. I might put them in the car or just redo the rear seat.

Here are some pics of the strip down and prepping for paint.

Image

Image


Image


and here is the worst of the rust in the whole car. I will be making a new custom patch piece by hand for this.

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 08 Sep 2013, 11:28 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
And now for some metal work. It didn't have the original hood orinment, so I decided to make a filler piece and weld it in. Here are a couple of pics.

Here is what I am starting with, all cleaned and ready.

Image


The patch piece I made.


Image


All welded up.


Image


After alittle grinding.

Image



Image


And now ready for some filler primer.

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 03 Oct 2013, 16:09 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Now moving back to the drivers rear 1/4 panel with all the rust. I had to cut out all the old and prep it for the new handmade custom patch panel.

Here is what I am starting with.

Image


And after I got it all cut out.

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 03 Oct 2013, 16:12 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Now time for some grinding and POR15 of the inner metal, then time to make the custom handmade patch panel.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 23 May 2014, 06:20 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Prepped and primered almost ready for the outer skin.

Image

Handmade by me 3 piece patch panel.

Image

Image

Getting it all lined up ready for welding.

Image

Image

tacking it into place.

Image

Now I just need to replace the rest of the wheel well and then grind, sand and prep for paint.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 11 Jul 2014, 14:21 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
More stuff done. finished welded the patch panel and ground it down smooth. then some body filler was use to make it all go away.

Image

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 16 Jul 2014, 20:11 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
With the heat the last couple of weeks its been hard working in the shop. So the other day My wife Jessica had some time off and wanted to help work on the Rambler. So I handed her the sander and paper and she went to town..

Image


Image


Image


Image


Image


Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 23 Feb 2015, 15:25 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
The Rambler is now back in the shop for a few weeks getting the rest of the body work done and primered. I am also planning on painting it and getting the car all putt back together with some custom touches. I have been body hammering the passenger quarter panel getting all the small dents out and ready for primer.
Also am thinking about shaving the door handles, but I just really like the feel of a good handle. Will post up some pics soon as I remember to take the time to get some pictures!

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
PostPosted: 10 Aug 2016, 10:43 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
*Update*

The Rambler is straight and primered. I got that done last year and the car has been in my garage since. I have been working on the interior and replaced the carburetor and have been driving it. Still needs a few more things, but its slowly getting done and will be finished up in the next few months!


Attachments:
20151019_182057.jpg
20151019_182057.jpg [ 1.96 MiB | Viewed 51986 times ]
20150306_154852.jpg
20150306_154852.jpg [ 2 MiB | Viewed 51986 times ]
20150306_154844.jpg
20150306_154844.jpg [ 1.95 MiB | Viewed 51986 times ]

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group