It is currently 26 Jun 2017, 04:16
If you are new here and want to register an account send an email to info@rewtcustoms.com so I know your a real person and activate your account.

All times are UTC - 8 hours




Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:37 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I got this truck in a trade last year in april. It has been a great little truck that gets awesome gas millage and has not had a any problems except wheel bearing and a bad u-joint. here are a couple of pics the day I picked it up.

Image

Alittle bit of damage..

Image

PO really couldnt decided on a color.

Image

And another color.

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:45 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
1st thing I did was lowered it.

Front. Just cut the coils and added new caster shims.
Image

Rear moved the axle from under the springs to on top of the springs, also added a set of shackles. PO removed them causing the rear end to bind and take out the U-joint.
Image

And a after pic, also started sanding off the multi layers of paint.
Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:49 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I did alittle more work on the truck this morning. First here is a pic of what it looked like to start.

Image

I started by removing everything off the front except the headlights.

Here is a pic of the grille before.

Image

New paint.

Image

Then did some stripping of the overspray off of the top of the griile chrome and headlight trim

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:50 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Here is another pic of the grille chrome half stripped.

Image

And all put back together with some new parts.

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:52 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
After being pretty busy with customers cars this last week, I really didnt get to much time to work on my truck. I decided it was just to nice to stay inside and watch tv all day, so after I mowed the lawn I broke out the welder and body hammers and made my tailgate straight. I started by knocking off the bondo the PO spread over the old Emblem holes which didnt hold up very good. I then welded in the 4 small holes around the tailgate that were there for no reason that I could see.


First coat of filler.
Image

Image

After sanding and the 2nd coat.
Image

Image

And back onto the truck.
Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:53 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Found a place this morning that sells the aftermarket clear style taillights, so I went up and got a set and installed them.

Here is the before.
Image

Image

And the new.
Image

And installed on the truck.
Image


Image

I was going to go with factory tailights, but these were cheap and I didnt have to pay shipping.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 07:56 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Its all one color again. Still has a couple of dents I need to adress and some sanding to to do. But its one color now and I can see what I need to fix alittle better.

All masked up and ready for the 2nd coat.
Image

Still waiting for my valance.
Image

Primered for now.
Image

Also replaced the door speakers and add some tweeters. It was a kit that came with new speakers and crossover I installed into the door, sounds way better.
Image

At this point I just started cruising and enjoying the truck for months, I then got a bagged s-10 in a trade, so i decided to fix some small stuff and paint the ranger.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 08:00 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
This truck is now in the shop getting some new suspension mods, body straighten and then painted.
Here are a acouple of pics of the work I got done this afternoon.

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 08:01 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
gettin the rear mini C done today.

Image

Image

And all back together..
Image

Gettin pressure washed tomorow, then back to have thr rear frame area painted, then paint.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 16 Jan 2013, 08:12 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Bedliner Refresh.

Before.
Image

After.
Image

And where I am today, I still got alittle more work to do on the bed, then it will get painted and reassembled.
Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 26 Jan 2013, 11:20 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Here are some of the pics of the new paint..

Image

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 26 Jan 2013, 11:23 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
And a few from outside.

Image

Image

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 26 Jan 2013, 11:34 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
And the interior.

First a couple before pics.


Image


Image

And changing it up.

Image


Image

and a pic of the new custom door panel.

Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 26 Jan 2013, 11:39 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
And Here are some pics of the truck put all back together.

Image


Image


Image


Image


Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 26 Jan 2013, 11:43 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Next the truck got all new speakers, including front and rear and also added some tweeters and installed inside of the door new crossovers, next it is getting a custom speaker box with 1 10" sub and amp behind the seat.

Here is a pic of the crossover.

Image


I will get more pics as soon as I start building the rest of the system.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 07 Feb 2013, 09:18 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Got all the touch up painting done, and have been driving this truck around. I am still looking to get a new headliner and visors to finish off the inside makeover.

I also ordered the front Valence yesterday and it will be here today so a quick paint job on it and install it onto the rig. Here is a pic of the style I ordered.
Image

I also upgraded the door speakers to a new set of 5x7's I am testing to see If I want to offer them to our customers.
Image

I will let you guys know if they work out and if your intrested in purchasing call the shop for a price.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 08 Feb 2013, 17:47 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I did get a couple of small things done this last couple of days.

First thing I did was painted the front and rear brakes and cleaned up the rims.

Image

Image

Image

Then I ordered the front foglight Valence I have been wanting for a while. It came in this morining.

Before pic.
Image


And after.
Image

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 11 Feb 2013, 07:03 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
And got the valence installed this weekend. Now just to get some fog lights in there.

Image

Next on the list is a new set of drop beams.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 11 Feb 2013, 07:10 
Offline
User avatar

Joined: 14 Jan 2013, 15:16
Posts: 610
Location: Rochester, Wa
Have you Checked into what Lights will fit?

_________________
Edward Campbell
Auto Enthusiast
Rochester, Wa


Top
 Profile  
 
 Post subject: Re: 1997 Ford Ranger
PostPosted: 28 Feb 2013, 14:30 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I just ordered a set of factory fog lights so I know they will fit. They should be here tommorow or monday.

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group