It is currently 28 Jun 2017, 18:12
If you are new here and want to register an account send an email to info@rewtcustoms.com so I know your a real person and activate your account.

All times are UTC - 8 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: My new welding cart.
PostPosted: 29 Aug 2016, 15:58 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
I have been wanting to do this for a long time. I have a mig welder, tig welder and plasma cutter. I have had the HF welding carts for years with the only real issue being the small plastic front wheels on the cart. I did upgrade them though. These carts have been great, but I want all my welders in 1 convenient spot.

I started this project by cruising offer up and found this cool little "welding table" for $20.00. I then picked up a set of caster wheels for it. and a middle tool box to place on the bottom. I then installed the middle shelf for a place to set the plasma cutter and some other supplies. I also added some brackets to hold the gas bottles on the back out of some scrap 1/4 plate I had left over from a project.

All the welders are bolted down so they don't move or get knocked off. I added a bunch of hooks for cords and other stuff.


Attachments:
IMG_20160829_121846496.jpg
IMG_20160829_121846496.jpg [ 4.48 MiB | Viewed 1928 times ]
IMG_20160829_121820593.jpg
IMG_20160829_121820593.jpg [ 4.26 MiB | Viewed 1928 times ]
IMG_20160829_121807203.jpg
IMG_20160829_121807203.jpg [ 4.25 MiB | Viewed 1928 times ]

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!
Top
 Profile  
 
 Post subject: Re: My new welding cart.
PostPosted: 29 Aug 2016, 17:52 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Everything is there and in 1 place. I also added an extra tool box handle that I had left over to the side. One end is fixed casters and 2 are the swivel. I am really happy with it!

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
 Post subject: Re: My new welding cart.
PostPosted: 17 Feb 2017, 18:12 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
Had to do some small changes. I decided to mount the bottles on the end of the cart to make it so the cart isn't so wide and can fit around in the shop better.


Attachments:
IMG_20170217_111334299.jpg
IMG_20170217_111334299.jpg [ 4.1 MiB | Viewed 530 times ]
IMG_20170214_171746540.jpg
IMG_20170214_171746540.jpg [ 4.27 MiB | Viewed 539 times ]

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!
Top
 Profile  
 
 Post subject: Re: My new welding cart.
PostPosted: 16 May 2017, 19:04 
Offline
User avatar

Joined: 14 Jan 2013, 18:33
Posts: 957
Location: Lakehood, Wa
video. Like, share and subscribe..

https://youtu.be/OUw--1Mo-Ww

_________________
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group