Chad's Toyota engine and mods

Post Reply
User avatar
RewT
Posts: 958
Joined: 14 Jan 2013, 18:33
Location: Lakehood, Wa
Contact:

Chad's Toyota engine and mods

Post by RewT » 01 Feb 2014, 16:56

This was a engine swap and the customer wanted a new Weber carb and Headman header.

Before pics.

Image

Image

Image

Pulling the motor.

Image


Image

Engine out, now time for a good degreasing.

Image
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!

User avatar
RewT
Posts: 958
Joined: 14 Jan 2013, 18:33
Location: Lakehood, Wa
Contact:

Re: Chad's Toyota engine and mods

Post by RewT » 01 Feb 2014, 17:00

Old engine getting stripped and parts clean for the new engine.

Image

Image

Image

Taping up and getting ready to paint.

Image

Image
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!

User avatar
RewT
Posts: 958
Joined: 14 Jan 2013, 18:33
Location: Lakehood, Wa
Contact:

Re: Chad's Toyota engine and mods

Post by RewT » 01 Feb 2014, 17:10

And after hours of degreasing, sanding and painting it was time to put it all back together.

Image

Image

Image

Here is the area I needed to make a block off plate for after removing some of the original exhaust.

Image

And a picture of the plate I made before paint.

Image
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!

User avatar
RewT
Posts: 958
Joined: 14 Jan 2013, 18:33
Location: Lakehood, Wa
Contact:

Re: Chad's Toyota engine and mods

Post by RewT » 01 Feb 2014, 17:13

And the engine back in and running great..

Image

Image

Image

Image

Image
Getting a good deal is no reason to accept sub-par work, since making it right costs more later.
RewT Customization & Fabrication. Get it done right the first time!

Post Reply